Page tree
Skip to end of metadata
Go to start of metadata

This is a high-level overview for upgrading your Shibboleth Identity Provider (IdP) software version 2.X to 3.X as part of the CCC SSO Federation. Detailed information is provided in the Shibboleth Configuration for CCC Guide.


Shibboleth IdP V2 End-of-Life

Shibboleth IdP V2 will reach end-of-life on July 31, 2016. No bug fixes, not even security-related bug fixes, will be issued after that date.


For InCommon Members
If you are an InCommon participant, please read this first! Upgrading to Shibboleth IdP V3


Before You Begin

Colleges participating in one or more of the statewide technology initiatives will need to go through a readiness process to ensure that your college/district system is compatible with the statewide IdP. This includes aligning the IdP and associated applications to support integration with statewide authentication services (SSO) for students and staff.

IdP Requirements for the CCC SSO Federation

To participate SSO for CCC Applications, colleges must implement an IdP solution that meets the requirements of the central IdP solution, including Shibboleth IdP or Portal Guard IdP.

Colleges using Shibboleth V2 will be required to upgrade to version 3, which facilitates single sign-on (SSO) authentication for students and staff to the statewide IdP and secure CCC web appliications. 

Failure to upgrade to Shibboleth version 3.X could result in students losing access to secure web applications as part of the CCC statewide IdP, including the new student services portal, MyPath; the common assessment system, CCCAssess; the Hobson's suite of Ed Planning tools; and Canvas, the statewide course management system (CMS)

Supported Identity Provider (IdP) Software

CCCTC supports Shibboleth Identity Provider (IdP) software as the preferred software for single sign-on (SSO) authentication for students and staff to access secure CCC web applications.  However, colleges that are not using Shibboleth for IdP configuration will need to need to ensure their campus system complies with the recommended, supported  

Colleges that have only one IdP configured for staff (i.e. Shibboleth 2.X for the CCCApply Administrator & Report Center) will be required to upgrade to Shibboleth version 3 in order to facilitate authentication capability for students, as well as admins and staff .

System Requirements

Refer to the Shibboleth System Requirements page for details on supported software platforms. There are differences, so your existing system may well not support the new version.

Setting Up a Test Environment

In general, it is not safe to upgrade a production installation directly. As a best practice, we strongly recommend that colleges set up a development environment in which to test the upgraded software to avoid extensive downtime and end up reverting the upgrade several times while trying to get back to a working system. 

Supported IdP Solutions

The CCC Tech Center currently supports Shibboleth and Portal Guard identity provider software solutions for student, staff, and faculty SSO. Colleges using an alternate solution should review the CCC SSO Federation IdP System Requirements page to ensure your solution is meeting the requirements necessary to integrate with CCC system-wide applications and the CCC IdP Proxy. 

Configuring Java

Make sure you've installed the Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files (see, towards the bottom).

The SecurityAndNetworking page, much of which may be new for you, includes material describing some newer features and an explanation of the full range of keys used by a "standard" V3 installation. As noted below, the upgrade process does not generate new keypairs in order to limit the changes introduced, but it's useful to understand the difference between an upgraded system and a new installation.

As when upgrading any software, you should make a good backup of your system, especially the old IdP's installation and configuration directories. The upgrade process will not destroy any information intentionally, but a backup makes restoring the old version easier.

The upgrade process will suggest or generate the following information for you:

  • the IdP's entityID (which you absolutely must override to match your existing configuration; do not change a system's entityID for any reason short of your organization selling its old domain name)
  • a secret key and key version file for securing cookies and other data produced by the IdP for its own use (this is a special Java keystore of type "JCEKS")
  • a default set of IdP configuration files based on this information, modified to include your original configuration where possible

Windows Installer Upgrade

The Windows Installer will recognize and upgrade the V2 "Quick Install". It should automatically locate the V2 configuration (defaulted toc:\Program Files\Internet2\Shib2Idp) and perform an upgrade. It will also configure the included Jetty container with the SAML key and certificate already in place. You will need to re-specify the Active Directory location and credentials when performing the upgrade.

Non-Windows / Standard Upgrade

Performing a V2 to V3 upgrade is similar to a standard V3 installation. When specifying an existing installation directory, the installer will recognize an existing V2 configuration and prompt for less information, and additional information is output.

When an upgrade is detected:

  • The V2 configuration files are copied to a new directory, conf.v2

  • The packed V2 warfile is copied to a new directory, war.v2

  • The directories logs and metadata are left untouched (note that leaving the latter in place means that new example metadata for the IdP isnot generated).

  • Specific legacy files that are generally compatible with V3 (attribute-resolver.xml, attribute-filter.xml, relying-party.xml) are pre-populated into the new config directory; these make up the bulk of your older configuration, save for authentication.

  • The old relying-party.xml file is also copied to metadata-providers.xml

  • The rest of the configuration is populated as for a new installation.
  • Finally, is altered to enable a legacy relying party configuration.

Next Steps


After the upgrade you will need to configure authentication and make any adjustments required for advanced use (see Configuration), but authentication and UI considerations are typically the main thing you'll need to deal with to get things going and get back to a working system. While there are strong parallels provided to what came with V2 (JAAS-based form login and RemoteUser-based authentication), there are key differences that have be accounted for in many cases:

  • The vt-ldap JAAS module provided with V2 has been replaced with a newer implementation based on the successor project called ldaptive. While the newer module is generally more capable (and has the advantage that it's fully supported), there can be differences in configuration.
  • The login form customization features in V2 were based on JSP, while Velocity templates are the strongly recommended approach in V3. Even if JSP is used, there will be inevitable changes required. In most cases, it's best to leave the default form in place during initial testing and save the UI migration for a later step.

Initial Testing

After starting the new version for the first time, watch for any errors in the log, and make a note of any warnings; most of those will be due to the use of a legacy relying-party configuration, but some will also note use of deprecated features or syntax. You can ignore deprecation issues until after you have a stable system.

If you encounter errors, you may be using features that are no longer supported and are encouraged to ask for help on the support list, but this should be rare.

You can test that the IdP is at least running successfully in the container with the status command line utility (idp.home/bin/ oridp.home\bin\status.bat).

Once you have a basically functional IdP, you'll want to focus on testing attribute resolution and filtering policy to verify that the output is consistent with V2. The upgraded command line utility, named aacli as before, is much faster because it operates as a localhost-only web service rather than loading an embdded copy of the IdP on every invocation, and it now also provides an indication of what kind of <NameID> content will appear for particular SPs, often crucial for commercial services using dumbed-down SAML software that you need to remain compatible with.

Post-Upgrade Tasks for metadata-providers.xml

No changes will normally be required to reach a working metadata-providers.xml configuration. However, there will be a number of warnings in idp-process.log resulting from ignored configuration elements and you should identify those to remove the warnings before proceeding.

  • Inside the outer level <RelyingPartyGroup>, retain the <AnonymousRelyingParty> and <DefaultRelyingParty> elements, as these are required by the legacy document schema, though they are not relevant to your metadata configuration.
  • You can remove any <ProfileConfiguration> elements within <DefaultRelyingParty>, as they will also be ignored anyway.
  • Remove the <security:Credential> with id="IdPCredential" if present; this is not related to metadata verification.
  • In V2, the relying-party.xml file (which is copied during the upgrade into the V3 metadata-providers.xml) typically included a <MetadataProvider id="IdPMD"> element which loaded the IdP's own metadata. In V3, this is no longer required, so we recommend that you remove this <MetadataProvider> element from the configuration.

  • Remove the text between the <!-- DO NOT EDIT BELOW THIS POINT --> comment and the closing </RelyingPartyGroup> tag. This will include a number of occurrences of <TrustEngine> and <SecurityPolicy> which are ignored as part of the upgraded configuration.
  • You should retain any custom <TrustEngine> configurations used by your metadata provider configurations.

After you have a simplified, working, configuration, we recommend that you migrate it entirely to the new configuration style at your leisure. An example of the new configuration style for metadata-providers.xml can be found in dist/conf/metadata-providers.xml.dist.

Post-Upgrade Tasks for relying-party.xml

Check your configuration for any uses of the defaultAuthenticationMethod attribute on <RelyingParty><AnonymousRelyingParty>or <DefaultRelyingParty> elements. In V2 configurations, the value urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport was sometimes used to indicate user/password authentication in general. In a V3 configuration, this will mean that only that authentication method will be available by default, and this may cause SAML 1 username/password authentication to become unavailable. The typical error seen in the idp-process.log file in this case will be:


Profile Action SelectAuthenticationFlow: None of the potential authentication flows can satisfy the request


In a V3 configuration, the available authentication flows are configured elsewhere, and if that has been done then the simplest corrective action will often be to remove all occurrences of the defaultAuthenticationMethod attribute from your configuration.

No other changes will normally be required to reach a working relying-party.xml configuration. However, there will be a number of warnings in idp-process.log resulting from ignored configuration elements and you should identify those to remove the warnings before proceeding. You should normally be able to remove everything from relying-party.xml other than a <RelyingPartyGroup> element containing:

  • an <AnonymousRelyingParty> element,
  • <DefaultRelyingParty> element,
  • any <security:Credential> elements referred to as signing credentials by the other elements.

In particular, you can normally remove:

  • all <MetadataProvider> elements (metadata providers are now configured in metadata-providers.xml),
  • any <security:TrustEngine> elements referred to by the metadata providers,
  • everything from the "<!-- DO NOT EDIT BELOW THIS POINT -->" comment to the final closing </RelyingPartyGroup> tag (you can safely ignore the stern warning in the comment there, none of that security configuration is used any longer)

After you have a simplified, working, configuration, we recommend that you migrate it entirely to the new configuration style at your leisure. An example of the new configuration style for relying-party.xml can be found in dist/conf/relying-party.xml.dist . In many cases, the following steps will be sufficient to migrate:

  • Copy dist/conf/relying-party.xml.dist to conf/relying-party.xml.
  • Change to replace the definition of the idp.service.relyingparty.resources property with the (commented out) default. Replace this text:


# Set to shibboleth.LegacyRelyingPartyResolverResources with legacy V2 relying-party.xml
idp.service.relyingparty.resources= shibboleth.LegacyRelyingPartyResolverResources


  • The revised definition should be:


# Set to shibboleth.LegacyRelyingPartyResolverResources with legacy V2 relying-party.xml
idp.service.relyingparty.resources = shibboleth.RelyingPartyResolverResources


  • Create new-style relying party overrides based on your existing overrides to reproduce your current behavior. TheRelyingPartyConfiguration topic describes how the new syntax and machinery works. Initially, copying over new overrides one for one will be simplest; later on you may find you can consolidate them using new features to select the relevant SPs (TBD, need to provide some help for this).
  • Copy dist/conf/credentials.xml.dist to conf/credentials.xml if the latter file does not already exist.
  • Make sure that your signing key and certificate files in the credentials directory have names matching the idp.signing.keyand idp.signing.cert properties in If they do not match (V2 IdPs frequently used the filenames idp.key and idp.crt while the default names in V3 are idp-signing.key and idp-signing.crt), then you can either change the settings in or rename the files in the credentials directory, your choice.

  • As an upgraded V2 IdP will not have credentials suitable for decrypting content sent to the IdP, for now just edit conf/credentials.xml to comment out the encryption credential, as follows:


        <bean class="net.shibboleth.idp.profile.spring.factory.BasicX509CredentialFactoryBean"
            p:entityId-ref="entityID" />


  • If you wish to enable decryption functionality in the IdP, you must create a keypair, uncomment this bean again and update the metadata you give to relying parties to include a new <KeyDescriptor use="encryption"> element. Note that while it's possible to reuse your signing keypair for this purpose, this is not advisable and since you're starting fresh anyway, it's simplest to just do the right thing.

Moving to the new configuration style will by default enable the new user consent functionality of the IdP, and you may wish to configure that separately.

User consent functionality can not be enabled while still using a legacy relying-party.xml; you must migrate to the new configuration style for this functionality to be available. Many other new features also require this conversion.

Additional Post-Upgrade Tasks

The default configuration of the V3 IdP, unlike V2, relies on client-side (cookie) storage of state information encrypted by a "DataSealer" component as described in SecretKeyManagement. An initial data sealer keystore and secret key is generated as part of the V2 to V3 upgrade process, but you will need to arrange for the seckeygen utility to be executed periodically in order to limit the time during which each secret key is in use, for example by a daily cron job running a script similar to the example given in SecretKeyManagement.

If you rely on the status page in V2, you may have modified the old web.xml file with a list of addresses to allow. Those should be copied over to the bean named shibboleth.IPRangeAccessControl in conf/access-control.xml to achieve the same result (and you won't need to rebuild or restart the IdP to change that list).





  • No labels
Write a comment…